Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Round Rock
If a gate on your property has stopped opening, is dragging at the latch, or has an operator that keeps tripping out, we can help. Gate Repair Georgetown is a gate-only specialist working throughout Round Rock, and we know how these systems are built here: subdivision perimeter iron on masonry piers, driveway gates added to homes in the Forest Creek, Behrens Ranch and Teravista neighborhoods, and rural pipe-rail gates out toward the eastern edges. Gates are all we work on, which means faster diagnosis and fewer callbacks. Call (833) 408-4022 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Round Rock Homeowners Call Gate Repair Georgetown for Gate Repair
Most gate companies in Central Texas are generalists. They fix garage doors, install fence, run a little electrical work, and get to gates when the schedule allows. We don’t. Our technicians have up to 13 years of experience working on nothing but gates, across both residential-grade operators and commercial systems, and that focus shows up in how quickly a problem gets pinned down.
We work in Round Rock constantly, so we’re not learning your property on your dime. We know that shallow limestone sits close to the surface across much of the city and that a post re-plumb here often turns into rock coring. We know the pattern of builder-grade operators on subdivision perimeter iron that were undersized from day one. That context shortens the diagnostic visit and keeps the written estimate honest.
Every price is quoted and agreed before any work starts. You’ll know what the repair involves and what it costs before we touch the gate. Our technicians are licensed and insured, and the estimate itself is free. Call (833) 408-4022 to get one scheduled.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Round Rock
Wrought Iron Gate Repair in Round Rock usually starts with the post, not the panel. When a wrought iron gate drags, sags or won’t latch, the cause is typically a hinge post that has heaved or racked out of plumb in the expansive limestone soil this area sits on. Our technicians check plumb and footing before anything else, then correct the sag at the post rather than bending hardware to compensate. From there we address rust at weld joints, worn hinges, and a latch that no longer lines up. Typical wrought iron repair in Round Rock runs $250 – $700 depending on whether the footing needs re-setting and how much weld and refinish work is involved. The written estimate sets the final price.
Perimeter and HOA Iron
Much of the iron we see in Round Rock belongs to HOA common areas and subdivision perimeters rather than a single driveway. Those gates carry constant traffic, so hinge wear and post movement show up faster than on a private gate. We’re set up to work through a punch list on a multi-gate property rather than treating each one as a separate visit.
Rust and Weld Repairs
Central Texas sun and summer heat are hard on painted iron, and rust tends to start at weld joints and the bottom rail. We grind out the corrosion, re-weld where the joint has failed, and treat the repair so it holds. Small weld fixes are often the cheapest way to extend the life of iron that’s otherwise sound.
Metal Gate Repair in Round Rock
Metal Gate Repair in Round Rock covers the aluminum and steel driveway gates that match the masonry-pier fencing throughout newer subdivisions, plus the pipe-rail and farm gates on the larger lots toward the east. The work ranges from realigning a gate that’s dropped on its hinges to replacing a bent frame section or correcting a track that a slide gate has jumped. Aluminum gates are lighter and tend to flex at the corners; steel and pipe-rail gates take impact damage and rust at the joints. Typical metal gate repair here runs $200 – $650. Every job is quoted in writing before work begins, so the number you agree to is the number you pay.
Realignment and Hinge Work
A metal gate that scrapes the ground or won’t close flush is usually a hinge or post problem, not a panel problem. We re-plumb the post, replace worn hinges, and adjust the gate back to a true swing. Doing it at the source keeps the fix from coming undone in a season.
Operators Matched to the Gate
A lot of the stalling and tripping we diagnose comes down to an operator that was never sized for the gate’s weight and daily cycles. We check the load against the operator’s duty rating, then correct the mismatch or recommend the right unit. Brands like LiftMaster and Elite are common on Round Rock driveway gates, and we know them well.
Trusted Brands We Service in Round Rock
We’re fluent across the operators you’re most likely to own. That includes DoorKing and LiftMaster on heavier residential and commercial systems, Mighty Mule and Ghost Controls on DIY-grade residential installs, and FAAC, BFT, Linear, Viking and Elite across the range in between. Because gates are the only thing we work on, we recognize each brand’s failure patterns and the parts each one typically needs. We don’t claim to stock parts locally; what we do is diagnose quickly, order the right component, and get the gate working on a schedule we set with you up front. If your operator is one of the major brands, there’s a good chance we’ve worked on it before.
Common Gate Repair Problems We See in Round Rock Homes
- Builder-grade operators on subdivision iron. Many perimeter gates installed through the 1990s-2010s build-out got operators undersized for the gate’s weight and duty cycle. They stall, trip out, or quit under load, and the fix is usually a correctly rated operator rather than another reset.
- Heaved hinge posts. Central Texas limestone soil swells in wet springs and shrinks in hard summer drought, which racks gate posts out of plumb. The gate then drags and sags at the latch even when the panel itself is fine.
- Automation added to a manual gate. Retrofits often skip the dedicated power and conduit run and the entrapment protection an automatic gate needs. We check all three before calling the job done.
- Heat and UV wear on electronics. Intense sun and summer heat degrade operator boards, seals and loop or solar sensors faster than in milder climates. Sensors that fail intermittently in the afternoon heat are a common call here.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Round Rock, TX
Gate repair in Round Rock is priced per job, and the written estimate you approve before work starts is the final price. Typical ranges for this market: a hinge or latch adjustment runs $150 – $350, metal and wrought iron gate repair with post correction runs $200 – $700, and electric or automatic gate repair involving an operator, control board or sensor runs $300 – $900. What moves the number is whether the footing needs re-setting, whether rock coring is required, the parts the operator needs, and how much weld or refinish work the gate calls for. We don’t charge a diagnostic or trip fee, and the estimate is free. Call (833) 408-4022 to book one.
We Also Serve Cities Near Round Rock
Our gate repair work extends beyond Round Rock to the surrounding communities, including Georgetown, Weir, Jarrell and Bartlett. If you’re on the edge of town or out on a rural lot with a farm or pipe-rail gate, we can still get to you. For the full picture of what we handle, see our gate repair service page, or find more on serving Round Rock and nearby areas.
Serving Round Rock, TX – Our Local Coverage Area
We serve Round Rock and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Round Rock
Because the hinge post has usually heaved or racked out of plumb in the expansive limestone soil, not because the gate panel has failed. Central Texas soil swells and shrinks with the seasons, and perimeter iron on masonry piers carries that movement into the hinges. Correcting the post usually fixes the sag. Call (833) 408-4022 for an exact quote; estimates are free.
The operator’s weight and duty rating, a dedicated power and conduit run, and working entrapment protection. Most retrofit problems trace back to one of those three. If your gate stalls or the sensors behave oddly, that’s where we look first. Call (833) 408-4022 to have it checked.
Yes. An automatic gate needs functioning entrapment protection, and photocells and loop detectors are how that’s done on a residential or HOA system. A gate that moves without it is a hazard, especially on a shared perimeter gate. We bring the safety devices up to spec as part of the repair. Call (833) 408-4022 for a quote.
Yes, it often does. Limestone bedrock sits shallow across much of Round Rock, so re-setting a post can mean hitting rock within a foot or two and coring through it. That extra labor is why a by-the-post quote that ignores rock can fall short. We account for it in the written estimate before work starts. Call (833) 408-4022 for an exact figure.
We work across the major brands, including DoorKing, LiftMaster, Mighty Mule, Elite, FAAC, BFT, Linear, Viking and Ghost Controls. Whatever operator you have, there’s a strong chance we’ve diagnosed it before. Gates are the only thing we service, so brand familiarity runs deep. Call (833) 408-4022 and tell us what’s on your gate.
Get Your Gate Working Again
Whether it’s a sagging perimeter gate, an operator that won’t hold, or a manual gate you want automated the right way, we can get it sorted. Call (833) 408-4022 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, so you’ll know exactly where things stand.
Written by the team at Gate Repair Georgetown.