Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Georgetown
If your automatic gate won’t open, is dragging, or has gone silent after a power cut, call (833) 408-4022. We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. We’re a gate-only shop, which means the person who arrives knows operators, not garage doors and not fence panels. Our technicians have up to 13 years of experience, and they’ve worked on the mix of builder-grade aluminum swing gates and older decorative iron you find across Georgetown. That local familiarity matters here: the clay soil and freeze cycles this town sits on create repair needs a generalist won’t diagnose correctly.

Why Georgetown Homeowners Call Gate Repair Georgetown for Electric Gate Repair
We specialize exclusively in gates, and that focus is the reason property managers in Georgetown keep our number. When an operator starts misbehaving, a general handyman is guessing at the control board while a gate specialist is reading the symptom. That difference shows up in diagnosis speed and in how often a part gets swapped unnecessarily.
Our service area covers all of Georgetown, from the historic homes around the downtown square out to the master-planned subdivisions on the edges. We know the difference between a period-correct iron gate set in limestone piers and a 2000s-era aluminum gate on a heaving post footing, and we price and plan accordingly. Response to Georgetown is fast, and same-day repair is often possible when you call early. For neighborhoods near Sun City and the other 55+ communities, we treat a broken gate as an access problem, not a cosmetic one. If a resident can’t get a car through, that call moves to the front.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Opener Repair in Georgetown
Gate Opener Repair in Georgetown usually starts with the operator itself: the box on the post that pulls the gate open and closed. When a homeowner calls us about an opener that runs but won’t move the gate, or one that clicks and does nothing, the cause is often a heat-damaged control board, a failing capacitor, or a limit switch that has drifted out of adjustment after the gate settled. Summer sun on a metal housing cooks wiring, and that’s a frequent culprit in this part of Central Texas. A typical opener repair in Georgetown runs $180 to $420, with the written estimate setting the final price before any work begins.
Control boards and limit switches
A board that has lost a relay will power the motor but skip the direction command. Limit switches drift as a gate settles, and the operator keeps pushing past where it should stop. We test both before recommending a part.
Battery backup and power interruptions
Older openers with a dead backup battery leave a gate stuck open or closed when the power drops. For residents who rely on the gate as their main entrance, that’s the difference between getting to an appointment and missing it. We check battery condition as part of any opener service.
Automatic Gate Repair in Georgetown
Automatic Gate Repair in Georgetown often means the gate and the operator together, because one causes the other to fail. The hinge post heaves out of plumb as the clay soil swells and shrinks, the gate starts to drag, and the operator strains to overcome the friction until something gives. That’s the repair pattern we see most in subdivision gates from the 1990s through the 2010s. Fixing only the operator without addressing the post just delays the next failure. Automatic gate repair in Georgetown typically runs $250 to $650, more when a footing needs re-anchoring, and the estimate is free.
Posts that heave with the clay
Hill Country soil is thin limestone over expansive clay, and wet-dry cycles move a post footing over the years. Re-leveling and re-anchoring the footing is often the real fix behind a dragging gate. Without it, a new opener inherits the same problem.
Pier re-alignment in older neighborhoods
Decorative iron gates set in limestone or masonry piers near the downtown square can creep out of alignment after a hard freeze cracks a hinge or seizes the operator. That work calls for both masonry and mechanical handling, not a hardware swap.

Trusted Brands We Service in Georgetown
Our technicians are trained on nine major gate systems, and the ones we see most in Georgetown homes are LiftMaster, Mighty Mule, FAAC, and Elite. Mighty Mule and Ghost Controls are common on residential DIY-grade installations, while FAAC, BFT, and DoorKing turn up on commercial-grade operators at gated communities and business entries. We also work on Linear and Viking. We don’t claim to stock parts locally; what we bring is factory familiarity and the ability to order the correct part once, not guess at three. For residential and commercial alike, that means fewer return visits and faster turnaround on the repair.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Georgetown Homes
- Hinge posts heaved by expansive clay. Wet-dry cycles push a post footing out of plumb, so the gate drags and the operator works harder than it should. This shows up most after a drought-then-rain swing or a hard freeze, and re-leveling the footing fixes what a new motor never would.
- Dead battery backup in older openers. When the power drops, a gate with a failed backup battery leaves residents stuck inside or outside. For anyone in Sun City or another 55+ community, that’s a real access problem, not an inconvenience.
- Heat-damaged wiring and remotes. Sun-baked wire insulation and circuit boards baked by summer heat cause intermittent remote and keypad failures. The remote often gets blamed when the operator’s receiver is the actual fault.
- Cracked hinges and seized openers after a freeze. A hard freeze can crack a hinge or lock an operator up, especially on older decorative iron gates. Spring callbacks for this failure mode are common in the older neighborhoods near the square.
Pricing for Electric Gate Repair in Georgetown, TX
Gate repair is priced per job, and the written estimate sets the final number before any work starts. A typical opener repair in Georgetown runs $180 to $420. Automatic gate repair that includes post correction or footing work runs $250 to $650. Keypad and remote repair, safety sensor repair, and control board repair are quoted individually once we’ve diagnosed the fault. What moves the price: whether a footing needs re-anchoring, whether the operator needs a control board versus a sensor, and whether the repair is on a residential Mighty Mule or a commercial-grade FAAC or DoorKing. The estimate is free, and the price is agreed before anyone touches the gate. Call (833) 408-4022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Georgetown
Our electric gate repair team also covers Round Rock, Weir, Jarrell, and Bartlett. If you’re just outside the Georgetown limits, call and we’ll confirm coverage and get an estimate on the calendar. Same gate-only specialty, same written estimate before work begins. The clay and freeze patterns that drive repair needs here don’t stop at the city line, so nearby homeowners get the same diagnosis we’d give in town.
Serving Georgetown, TX – Our Local Coverage Area
We serve Georgetown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Georgetown
Heavy rain swells the clay soil under the hinge post, pushing the footing out of plumb so the gate drags against the operator. The fix is usually re-leveling and re-anchoring the footing rather than replacing hardware. Call (833) 408-4022 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
A quiet operator with dependable battery backup and simple remote and keypad control is the right choice for anyone who relies on the gate as a primary entrance. LiftMaster and FAAC both make operators suited to residential swing gates with backup power. We’ll recommend one based on your gate’s weight and travel, not a sales target. Call (833) 408-4022 for a free estimate.
Intermittent remote function is often the operator’s receiver or a sun-damaged circuit board, not the remote itself. Heat and aged wiring inside the housing cause most of these failures in Central Texas. We test the receiver and the board before recommending a replacement. Call (833) 408-4022 for a free estimate.
Stop running the operator. Grinding after a freeze usually means a seized gear, a cracked hinge, or a limit setting that slipped when the gate shifted with the thaw. Keep running it and you risk burning out the motor or damaging the board. Call (833) 408-4022 and we’ll diagnose it. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Yes. FAAC and BFT are both on our list, along with LiftMaster, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We work on residential and commercial-grade operators alike. Call (833) 408-4022 for a free estimate and we’ll get you on the schedule.
If your gate isn’t opening, is dragging, or has gone quiet, call (833) 408-4022 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, so you know the number before the tools come out.
Written by the team at Gate Repair Georgetown.