Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Georgetown?
Gate access control in Georgetown typically runs $350 to $1,800 for a single residential entry, depending on whether you’re adding a keypad and intercom to an existing operator, replacing a failed board, or wiring a full entry system with vehicle detection and phone-based access. A standalone keypad swap is the low end at roughly $185 to $420. Commercial multi-lane systems with loop detectors, phone entry and audit logs start around $2,400 and climb from there. We confirm the number on site, give you a written estimate, and the estimate sets the price.
Key Takeaways
- Residential gate access control in Georgetown: $350 to $1,800 typical, installed.
- Keypad-only replacement: $185 to $420.
- Intercom or video entry addition: $450 to $1,300.
- Vehicle loop detection: $475 to $950 per loop.
- Commercial multi-unit entry systems: $2,400 to $7,500 and up.
- The written estimate is free, and it sets the final price. Call (833) 408-4022.
Gate Access Control Cost Breakdown (2026)
These are estimated ranges for the Georgetown area in 2026. Access control means the parts that decide who gets in: keypads, card readers, intercoms, phone-app controllers, exit devices, safety loops and the wiring that ties them to your gate operator. It does not include the gate itself or a full operator replacement, though those often get bundled into one visit.
| Item | Typical installed range | Notes |
|---|---|---|
| Standalone keypad (wired or wireless) | $185 – $420 | Entry code access, single gate |
| Keypad plus intercom | $450 – $1,300 | The most common residential upgrade |
| Video intercom with in-home monitor | $850 – $1,700 | Depends on run distance and monitor count |
| Phone-app controller (smart access) | $380 – $900 | Requires usable Wi-Fi at the gate |
| Exit button or free-exit device | $120 – $290 | Required for safe egress on many installs |
| Vehicle loop detector (one loop) | $475 – $950 | Safety and free-exit detection |
| Photoelectric safety beams (pair) | $240 – $520 | Stops the gate on obstruction |
| Low-voltage wiring run | $8 – $22 per foot | Distance and trenching drive this |
| Control board or access module replacement | $290 – $780 | Board cost varies by brand |
| Commercial multi-tenant entry system | $2,400 – $7,500+ | Directory, phone entry, audit log, multiple lanes |
What pushes a Georgetown job toward the top of these ranges: long wire runs from the house or building to the gate, a gate that sits on a slope, an older operator that doesn’t have a dedicated access-control input, and commercial properties where the system needs a tenant directory and entry records. What pulls it toward the bottom: a modern operator that already accepts a keypad, a short wire run, and a like-for-like part swap.
One thing we see a lot in this market: a homeowner buys a keypad online, gets it half wired, and calls us because the gate opens on its own or won’t latch. Most of those calls are a mismatched input on the operator or a missed safety device, not a bad keypad. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule regularly, so matching the access device to the operator is usually the fast part of the visit.
What Affects Gate Access Control Pricing in Georgetown
- Gate operator brand and generation. A Mighty Mule or Ghost Controls operator takes a different keypad and wiring approach than a LiftMaster or a commercial DoorKing unit. Older operators sometimes need a relay or interface module before a new access device will talk to them, and that part adds to the job.
- Distance from power and network. A gate near the house is cheap to wire. A gate at the back of a long driveway means more wire, more conduit, and sometimes a trench. That run is often the largest single line on the estimate.
- Property type. A single-family home in Sun City or Wolf Ranch needs one keypad and one intercom. A commercial lot on Williams Drive or a multi-tenant property near downtown Georgetown needs a directory, multiple entry points and a record of who came through, and that’s a different class of system entirely.
- Safety devices. Vehicle loops and photo beams aren’t optional extras on most automated gates. They stop the gate on an obstruction, and they typically need to work with whatever access control you add. Skipping them creates both a safety problem and repeated callbacks.
- Gate type and travel. A single swing gate is straightforward. A slide gate with a long travel, or a double swing with a paired operator, takes more setup and more safety devices to cover both leaves.
- Existing wiring condition. If the low-voltage wire at the gate is damaged, corroded at the connections, or was run without conduit, we may need to re-run it before new access control will be reliable. That’s a separate line item, and it’s better to know up front than to find out later.
How to Save on Gate Access Control
The biggest lever is doing it in one visit. If your gate operator is due for a repair or you know the board is acting up, adding access control at the same time spreads the trip and the wiring across one job instead of two. It also means we test the whole chain, operator and access device together, instead of guessing which half is at fault.
- Get the estimate before you buy parts. A keypad that looks right on paper may not match your operator’s input. Asking first keeps you from eating the cost of the wrong device.
- Keep it to one entry point. A single keypad and intercom on the main gate handles most residential needs. Adding a second lane or a pedestrian gate roughly doubles the access line items.
- Use your phone where it makes sense. A phone-app controller can replace a standalone intercom on some setups and often costs less than a video intercom with an in-home monitor. It needs solid Wi-Fi at the gate, which we check on site.
- Fix the wiring once. If the low-voltage run is failing, replacing the access control without touching the wire tends to bring the same problem back. Do both, and you’re done.
- Ask for the free estimate. We come out, look at the operator, the gate and the run, and give you a written number. Call (833) 408-4022 and we’ll get it scheduled.
Repair or Replace: What Makes Sense for Access Control in Georgetown?
Repair first when the operator, gate and wiring are sound and only the access device has failed. A keypad that stopped reading codes, an intercom with a dead speaker, or a control module that lost its programming are all repair jobs in the $185 to $780 range. Replace when the operator is obsolete and no longer accepts modern access devices, when the control board has failed twice, or when the parts to fix it take weeks to source. In that case, putting money into access control on a dying operator is throwing good money after bad; the better move is to plan the operator and access control together.
What Happens When You Call
You describe the gate, the operator brand if you know it, and what the access control is doing or not doing. We book a visit, come out and look at the whole system, and hand you a written estimate before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Why a Gate Specialist for Access Control
Access control lives at the intersection of the operator, the wiring and the safety devices. A general handyman can hang a keypad. Getting it to work with your operator, through your existing safety loop, without the gate ghost-opening at 2am, is a different job. We specialize exclusively in gates, which means we’ve worked on the residential DIY-grade systems and the commercial-grade operators that run the bigger properties around Georgetown. Our technicians have up to 13 years of experience. If your operator is a Mighty Mule or a commercial FAAC unit, we know it.
We handle the full lifecycle too: manual gate repair, electric gate repair and new gate installation, so you don’t need a second contractor as your needs change. For the broader picture on gate work around the city, see our gate repair Georgetown page, and for area details, the Georgetown page.
FAQs – Gate Access Control Cost
How much does a keypad cost for a gate in Georgetown?
A standalone gate keypad in Georgetown typically costs $185 to $420 installed. That range covers a wired or wireless unit on a single residential gate. If your operator needs an interface module to accept the new keypad, add $60 to $180. Call (833) 408-4022 for an exact quote on your operator – estimates are free.
Can I add phone-based access to my existing gate?
Yes, in most cases, and it usually runs $380 to $900 installed. The gate needs usable Wi-Fi signal, a modern operator with an access input, and a controller that matches the brand. We check all three on the visit before recommending a device. Call (833) 408-4022 to book it.
Is it cheaper to repair or replace a gate access control board?
Repair is cheaper when the board is the only failed part, typically $290 to $780 for a board or module replacement. Replacing the whole operator only makes sense when the board has failed more than once or the operator no longer takes modern access devices. We’ll tell you which you’re looking at on the visit. Call (833) 408-4022 for a free estimate.
Do I need a vehicle loop with my access control system?
In most cases, yes, and a single loop runs $475 to $950 installed. The loop detects a vehicle at the gate so it doesn’t close on it, and it handles free-exit so vehicles can leave without a code. Skipping it usually leads to repeated service calls and a real safety problem. Call (833) 408-4022 to price it for your gate.
What does a commercial gate access control system cost in Georgetown?
A commercial multi-tenant entry system in Georgetown typically starts around $2,400 and can reach $7,500 or more, depending on the number of entry lanes, whether there’s a visitor directory, and how much wiring is needed. Smaller single-lane commercial setups come in lower. The written estimate sets the final number. Call (833) 408-4022 for a free on-site estimate.
Can you come today?
Same-day visits are often possible when you call early. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 408-4022.
Get a Free Gate Access Control Estimate in Georgetown
If your keypad has stopped working, your intercom is dead, or you’re planning a new entry system for a commercial property, the fastest way to a real number is a phone call. We’ll ask a few questions about the operator and the gate, book a visit, and hand you a written estimate before any work starts. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule systems, and we know the difference between a keypad that’s failed and an operator that’s the real problem. Call (833) 408-4022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Georgetown market as of 2026. Gate Repair Georgetown offers free estimates – call (833) 408-4022.
Written by the team at Gate Repair Georgetown.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Jennifer Norris"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Veronica Rodriguez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Lisa Anderson