Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bertram, TX
If your gate needs a new installation, the job in Bertram rarely looks like the job in a subdivision. Driveways here are long, the ground is limestone and caliche, and more properties sit on acreage with a custom-built pipe-and-rail gate than with a builder-installed aluminum one. That changes what we measure, what we set, and what we build. We specialize exclusively in gates – installation, repair, and electric gate work – and we bring the right approach for rural Burnet County properties. Call (833) 408-4022 to set up a free on-site estimate.
Why Bertram Homes Are Different
Out here the ground is limestone and caliche, so gate posts don’t rot like they do in East Texas – instead they loosen and heave, and a gate that swung fine in spring starts dragging on the ground by August. That single fact drives most of the work we do in Bertram. When a post shifts in rocky soil, the gate frame twists, the latch stops lining up, and an operator that once opened smoothly starts straining against a panel that no longer sits square.
The housing stock reinforces it. Bertram skews toward rural single-family homes and manufactured homes on acreage, plus older modest frame homes in the town core, and many properties have long gravel or caliche driveways with custom-built metal gates rather than builder-installed ones. So widths are often non-standard, hardware has to be matched to a frame someone welded rather than ordered from a catalog, and resets sometimes involve field welding and re-set posts. Central Texas heat and periodic drought-to-flood swings add to it: steel frames rust and sun-degrade, wood panels weather, and operators take a beating. If your property is in or around the 78605 core, expect the gate to be heavier and wider than what a suburban installer is used to.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Bertram Services
Two jobs bring most Bertram property owners to us: getting an existing gate working again, and getting a new one built and set correctly from the start.
Gate Repair in Bertram
Most repair calls in Bertram involve a gate that has stopped swinging true or latching cleanly, and the cause usually traces back to a post that has heaved in the caliche rather than a failed hinge. We diagnose the frame first, then the hardware, then decide whether a reset, a weld, or a hardware match to a non-standard width is what gets the gate working. Long pasture and driveway gates on tube-steel frames are our normal work here, not decorative backyard panels. For sagging posts, dragging panels, and binding hinges, see Gate Repair in Bertram.
Electric Gate Repair in Bertram
When a gate stops answering the remote, the operator is often the second problem, not the first. A panel that has twisted in shifting ground makes an operator work harder, trip its limits, or stall partway open. We work on both residential-grade operators and commercial-grade systems, so a Mighty Mule on a ranchette driveway and a heavier commercial unit on a working property both get a real diagnosis rather than a guess. We check the mechanics before we touch the electronics. For operator faults, wiring, and safety edges, see Electric Gate Repair in Bertram.
Gate Installation in Bertram
Gate installation in Bertram starts with the ground, not the gate. Limestone and caliche mean posts have to be set to proper footing depth and braced against soil that shifts with drought-to-flood swings, and long gravel driveways mean a wider, heavier panel than a suburban lot ever needs. We measure the opening, match the frame to the driveway, and set the gate so it swings true through a Central Texas summer. Installation is measured, ordered, and scheduled – not a same-day job. We plan gate installation around your property and the way you actually use the entrance.
Driveway Gate Installation
Signs you need it
You need a driveway gate installation when the entrance is wider than a standard gate, when an old gate has been reset so many times the frame is past saving, or when a new property has no gate at all across a long gravel or caliche drive.
What it costs in Bertram
A typical driveway gate installation in Bertram runs $1,800 to $6,500 depending on width, frame material, and whether an operator is included.
How we do it
We measure the opening and the drive grade, set posts to proper footing depth in the rocky soil, hang a frame sized to the actual width, and check the swing and latch before any operator is added.
Automatic Gate Installation
Signs you need it
You need an automatic gate installation when the gate is too heavy or the drive too long to open by hand comfortably, or when you want controlled entry on a property you can’t see from the house.
What it costs in Bertram
A typical automatic gate installation in Bertram runs $3,200 to $9,000, covering the operator, the power run, and the safety edges, with the written estimate setting the final price.
How we do it
We confirm the gate swings freely by hand first, then mount the operator, run power to the unit, set the travel limits, and fit the safety edges before we test the full cycle.
What Gate Installation Costs in Bertram
These are typical estimates for Bertram properties. The written estimate you receive after we look at the opening is what sets your final price, and nothing starts until you’ve agreed to it.
| Item | Typical range in Bertram |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $3,200 – $9,000 |
| Gate operator and safety edge setup | $1,200 – $2,800 |
How long does gate installation take in Bertram?
Most installations take a scheduled visit or two depending on the gate type and whether power has to be run. Posts set in limestone and caliche need proper footing depth, which can add time. We give you the schedule in the written estimate.
Do you handle the power run and the safety edges?
Yes. An automatic gate install includes running power to the operator and fitting the safety edges so the gate reverses on contact. That’s part of the quote, not an extra. Call (833) 408-4022 for a free estimate.
Brands We Service in Bertram
We work on the operators Bertram property owners actually own: DoorKing, Elite, Mighty Mule, and LiftMaster, among others. We don’t stock parts on any truck – we diagnose the unit, identify the part, and order what’s needed. That keeps diagnosis fast and turnaround steady. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bertram, TX
Here’s what the typical work costs across Bertram. Each row is an estimate range; the written estimate you get after we see the gate sets the final figure, and the price is agreed before any work begins.
| Service | Typical range in Bertram |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $3,200 – $9,000 |
| Gate operator and safety edge setup | $1,200 – $2,800 |
Price climbs with gate width, frame weight, footing depth in rocky soil, and whether power has to be run a long distance to the operator. We quote it upfront and confirm it with you before work starts, so the invoice matches the number you agreed to.
Neighborhoods We Serve in Bertram
We handle gate work across Bertram and the surrounding acreage properties, from the town core out along the gravel and caliche drives where long driveway and pasture gates stand. Because the area is spread out, we plan dispatch around the day’s jobs – call and we’ll book a window. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Downtown Bertram core
- Ranchettes and acreage parcels around 78605
- Horse and livestock properties on the outskirts
- Rural single-family and manufactured home tracts
Service Area – Cities Near Bertram
Bertram sits in Burnet County, and we cover gate installation, repair, and electric gate work for nearby communities too. If you’re outside the immediate Bertram area, check the closest city page for the right details: Georgetown, TX, Round Rock, TX, Jarrell, TX, and Weir, TX. We arrange on-site estimates around your property and the work involved.
Serving Bertram, TX – Our Local Coverage Area
We serve Bertram and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bertram
We answer 24/7, and crews dispatch from 7am to 7pm, Sunday through Friday, with the goal of same-day service where the schedule allows. On-site estimates are free. A call outside dispatch hours is booked into the next opening.
Most cities require a permit for a permanent driveway gate, and acreage properties often have no HOA. Ask the City of Bertram about permits before you build. We give you the specs you need for the application, and the written estimate lists what’s included.
We cover Bertram and the surrounding Burnet County acreage properties, plus nearby towns through their own city pages. If you’re unsure whether you’re in range, call (833) 408-4022 and we’ll confirm coverage and book a free estimate.
Whether you’re replacing a sagging pasture gate across a caliche drive or adding an automatic operator to a long entrance, we can get it set right the first time. Call (833) 408-4022 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, brings our technicians to Bertram and the surrounding area.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Bertram Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Luis Vargas"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Lisa Anderson"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Jennifer Norris