Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Weir
A gate that won’t close or won’t open leaves a Weir property exposed, and on a multi-acre tract that matters more than it does in a subdivision. We work on gates all day, every day, and we’re familiar with how they’re built out here along the I-35 corridor between Georgetown and Jarrell. We know what central Texas heat and clay soil do to a hinge post, and we know what pasture dust does to a slide track. Our technicians have up to 13 years of experience, and we specialize exclusively in gates. Call (833) 408-4022 and we’ll get a technician out.
Why Weir Homeowners Call Gate Repair Georgetown for Gate Repair
We’re a gate specialist, not a general handyman or a fence company with a gate add-on. That focus shows up in the diagnosis. When a Weir gate drags at the latch, we check the hinge post footing before we touch the panel, because out here the post is usually the real problem and swapping hardware won’t fix a post that has heaved.
We’re brand-fluent across the operators common on rural Texas tracts, from residential Mighty Mule and Ghost Controls units to heavier commercial systems like FAAC and DoorKing. We don’t carry parts on a truck. We confirm the part, order it, and schedule the return visit, which is faster than a generalist guessing at a model they’ve never seen.
We work along the whole I-35 corridor, and Weir is a regular part of that. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening. The price is quoted and agreed before any work starts, and the written estimate sets the final price.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Weir
Wrought Iron Gate Repair in Weir usually means bringing back a heavy steel driveway entry that someone built by hand and that no stock hardware fits anymore. The job starts with the post, not the panel. We resurvey the footing, correct the sag, and then match the salvage work to the custom dimensions the gate already has. Because Weir is unincorporated, no municipal permitting or HOA architectural review stands in the way before a driveway gate is repaired or rehung. The work is measured and scheduled, and the written estimate sets the price before we begin.
Rust and Weld Restoration
Central Texas heat bakes the finish off a steel gate, and the weld joints at the hinge side are where rust sets in first. We clean the joint, re-weld where the metal has cracked, and treat the rusted areas. Non-standard pickets and scrollwork get matched rather than replaced wholesale.
Hinge and Post Geometry
Expansive clay soils shift a hinge post through the drought-to-flood swings, and the panel follows it out of square. We check plumb on the post, reset the footing where needed, and rehang the panel so it swings true. That correction is what stops the drag at the latch.
Metal Gate Repair in Weir
Metal Gate Repair in Weir is mostly field work on welded steel-pipe gates and the occasional chain-link frame, the kind of gate installed by the property owner years ago and never dimensioned to a catalog. A typical gate realignment in Weir runs $150 to $400. Hinge and post repair, which is the call that comes in most often after summer heat, typically runs $250 to $700 once a footing reset is involved. Weld and rust repair runs $200 to $550. When a slide operator has stalled on a jammed track, expect the visit to cover both the jam clearing and the track realignment. We quote before we start.
Custom Hardware and Salvage
Owner-built gates rarely use standard hardware, and the right move is to salvage what’s there rather than force a stock part onto it. We measure the existing hinge, latch, and stop, then match or fabricate to fit. That keeps the gate working the way it was built.
Pasture Dust and Track Jams
Wind-driven dust and tumbleweed off the open pasture pile onto slide-gate tracks and into the rack and pinion, and the operator stalls. We clear the track, realign it, and check the gear rack for wear. Realigning a rack and pinion is often part of the same call as a hinge fix.
Trusted Brands We Service in Weir
We’re trained across nine major gate systems: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether your operator is a Mighty Mule on a residential swing gate or a commercial FAAC system on a heavier entry, we know how it’s built and how it fails. We don’t stock parts on a truck, so we diagnose the operator, confirm the correct part, and schedule the return. That process is faster and more accurate than trial-and-error by a contractor who services gates only occasionally. Your gate brand is on our list, and we know it inside out.
Common Gate Repair Problems We See in Weir Homes
- Hinge post heaves and the panel sags. Clay-soil movement through the drought-to-flood swings lifts the post, and the gate drops out of square and drags at the latch. The correction starts at the footing, not the hinge.
- Tumbleweed and pasture dust jam slide tracks. Wind off the open land pushes debris onto the track and into the rack and pinion, and the operator stalls. Clearing the track and realigning the rack is often the fix.
- Owner-installed cedar and welded pipe gates lose alignment. Gates built on-site and never dimensioned to a standard lose their geometry at the hinge post. They need custom-dimension salvage rather than stock parts.
- Rusted hinges on aging steel frames. Heat and periodic rain wear the weld joints and hinge pins on older steel gates. Cleaning, welding, and treating the rust keeps the panel swinging and the finish intact.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Weir, TX
Here’s what gate repair runs in Weir. A typical gate realignment is $150 to $400. Hinge and post repair, the most common call after summer heat, is $250 to $700 once a footing reset is involved. Weld and rust repair on a wrought iron or steel panel is $200 to $550. Lock repair and custom hardware matching fall in the $100 to $300 range. On the electric side, operator and access-control diagnostics run $150 to $350, and the part is quoted separately once we’ve confirmed it. What moves the number is footing depth, how much of the panel needs weld work, and whether the existing hardware can be salvaged or has to be fabricated to fit. A technician measures on site, the estimate is free, and the price is quoted and agreed before any work starts. The written estimate sets the final price. Call (833) 408-4022 for an exact quote.
We Also Serve Cities Near Weir
We work the whole I-35 corridor, so we’re a short drive from the neighboring towns. Beyond Weir, we serve Round Rock, Georgetown, Jarrell, and Bartlett. If your gate is out along the corridor, our gate repair team covers it. Same approach, same written estimate, before any work starts.
Serving Weir, TX – Our Local Coverage Area
We serve Weir and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Weir
No. Weir is unincorporated, so there’s no municipal permitting or HOA architectural review to clear before a driveway or livestock gate is repaired or rehung. One thing to know: if the gate serves a shared entry or an access-control system on a gated tract, coordinate the hardware work directly with the owner or management entity, not a city or HOA design committee. Call (833) 408-4022 for an exact quote, and the estimate is free.
Most of the time it’s the post. Expansive clay soils that move through the drought-to-flood swings lift and shift the hinge post, so the panel drops out of square and drags at the latch. The panel itself is usually fine. A technician check on the post footing settles it, and the estimate is free.
Yes, and they need to be working. Any automated gate should have functioning entrapment protection under UL 325, and a technician should confirm it after a repair or a rehang. If a sensor or edge has failed, that’s a safety issue worth fixing before the operator runs again. Call (833) 408-4022, and the estimate is free.
Debris on the track is the usual cause in Weir. Wind-driven dust and tumbleweed off the open pasture pile onto the track and into the rack and pinion, and the operator stalls. Clearing the track and realigning the gear rack is often the fix. Call (833) 408-4022 for an exact quote.
Yes. Owner-built cedar and welded steel-pipe gates rarely use standard hardware, so we measure the existing hinge, latch, and stop and match or fabricate to fit rather than forcing a stock part. Salvage is the right approach when the hardware is custom.
Contact Gate Repair Georgetown
If your gate in Weir is dragging, jammed, or rusted, call (833) 408-4022 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re trained on Mighty Mule, LiftMaster, FAAC, and the rest of the major systems, and we’re gate specialists from start to finish. The price is quoted and agreed before any work starts, and the written estimate sets the final price. We’d be glad to diagnose your gate and get it working right.
Written by the team at Gate Repair Georgetown.