Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Little River-Academy
If you’re reading this from a gravel lane off a county road near Little River-Academy, you already know the problem: your gate is the only way in, and it just quit working. We fix gates across ZIP 76554, from the older small-town lots in the Academy community to the multi-acre tracts out toward the Little River bottom. Out here a gate isn’t a decorative finish. It’s your driveway, your livestock barrier, and your access control all in one. Our technicians have up to 13 years of experience, and we specialize exclusively in gates. Call (833) 408-4022. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Little River-Academy Homeowners Call Gate Repair Georgetown for Gate Repair
We’re a gate-only shop. That matters in a place like Little River-Academy, where the gate on your property is probably a wide pipe or tube farm entrance on a long caliche lane rather than a subdivision ornamental panel. Brand fluency across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule means we’re rarely guessing at an operator, whether it’s an off-grid Mighty Mule on a battery at the back of an acreage or a commercial-grade FAAC unit at a property entrance.
Most of what we hear from Little River-Academy callers is the same story: the gate worked in spring, then the clay dried, the post moved, and now the panel drags and won’t latch. A generalist adjusts the hinges and the problem returns in six months. We start with the post, because that’s where the failure starts. We quote the price in writing before any work begins, so you know the number before a wrench turns. Call (833) 408-4022 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Little River-Academy
Wrought Iron Gate Repair around Little River-Academy is usually about keeping an older ornamental entrance aligned and latching on rural property, and in this market a straightforward realignment, hinge repair, or weld touch-up typically runs $150 to $350, while post re-setting adds to that. You need it when a gate that used to swing clean now scrapes the drive, or when a fence-line entrance at a manufactured home or older in-town lot has rusted at the joints. We weld, re-hang, and re-plumb. If the operator is involved too, we handle that in the same visit.
Rust and Weld Repair on Older Entrances
Rust collects at the bottom rail and at hinge brackets first, and a weld that’s cracked will let a panel rack out of square. We clean the joint, weld it properly, and treat the corrosion so it doesn’t come straight back. It’s a repair, not a cosmetic patch.
Latch and Hinge Corrections
A gate that won’t latch is often a hinge problem upstream of the latch itself. We check the hinge alignment against the post before touching the catch, then correct whichever is actually out of true.
Metal Gate Repair in Little River-Academy
Metal Gate Repair in Little River-Academy covers the tube, pipe, and chain-link entrances that make up most of the gates out here, and costs typically land between $200 and $500 depending on whether the post footing needs re-setting along with the gate itself. This is working-land repair. Wide farm swing gates take a beating, and when one starts dragging the lane or stopping short of the catch, the fix usually starts underground at the hinge post footing, not at the operator arm. We handle sag correction, re-hanging, and post re-setting as one job.
Realigning a Wide Farm Swing Gate
A long panel amplifies any twist in the post. We re-plumb the post, set the footing in properly compacted base, then re-hang the panel and readjust the operator limits, arm, or rack and pinion to match the new geometry. It takes longer than a hinge tweak. It also lasts.
Manual and Automated Metal Gates
Slide gates that have come off the track, swing gates with worn hinges, and powered entrances that have lost their travel all fall under the same work. Whether the operator is a Mighty Mule or a commercial-grade unit, we diagnose the gate first and the operator second.

Trusted Brands We Service in Little River-Academy
We work on the operators that actually show up on acreage entrances around Little River-Academy. Elite, Mighty Mule, LiftMaster, and FAAC systems all come through regularly, from battery-powered solar openers on long runs to heavier commercial-grade arms at property entrances. We don’t keep parts in stock or claim otherwise; what we do have is familiarity with how each of these brands fails and what it takes to bring it back. That usually means a faster diagnosis and the right part ordered once, rather than a second visit after a wrong guess. Your gate brand is on our list, and we know it inside out.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Little River-Academy Homes
- Hinge posts heaved by blackland clay. The shrink-swell soil across this part of Bell County moves dramatically between wet springs and dry summers, rotating and lifting posts so a wide swing gate sags, drags, and quits latching. Re-plumbing and re-setting the footing is the repair that holds.
- Solar openers starved on long runs. A gate set hundreds of feet from the meter often runs on a solar panel and battery, and an entrance that sits in heavy shade for part of the day loses its charge and stalls mid-travel. We check the panel, battery, and charge circuit together.
- Livestock damage to panels and racks. Cattle leaning and rubbing on cattle-panel and pipe-corral gates bend panels and rack the operator arm. That throws off the loop detector or keypad entry sequencing until the gate is straightened and the arm reset.
- Hardware fatigue from Texas heat and freezes. Summer heat and the occasional hard freeze both stress operator components and hardware on rural entrances. Worn hinges, cracked welts, and tired batteries surface on the same schedule every year.
Pricing for Gate Repair in Little River-Academy, TX
Gate repair in Little River-Academy is priced per job after we look at the gate, and the written estimate sets the final number. Typical ranges: a straightforward realignment or hinge repair runs $150 to $350; metal gate repair on a tube or pipe entrance with sag correction runs $200 to $500; and re-setting a hinge post footing in this clay pushes toward the upper end of that range because the post has to come out and go back in properly. Operator and solar battery work adds to the job depending on the system. The estimate is free, and the price is quoted and agreed before any work starts. Call (833) 408-4022.
We Also Serve Cities Near Little River-Academy
We work the rural entrances around Little River-Academy and the neighboring communities of Holland, Bartlett, Jarrell, and Weir. If your gate sits on a long lane anywhere in this stretch of Bell County, our gate repair team can help. Call (833) 408-4022 for a free estimate.
Serving Little River-Academy, TX – Our Local Coverage Area
We serve Little River-Academy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Little River-Academy
It’s usually the gate, specifically the hinge post. The operator is often just trying to push a panel that’s gone out of plumb. We check the operator and its safety photocell, but we start with the post: re-plumb and re-set the footing in compacted base, correct the sag, re-hang the panel, then readjust the operator limits, arm, or rack and pinion. Call (833) 408-4022 for a free estimate.
Yes, when the operator is sized for the panel and the battery and panel are healthy. The failures we see aren’t usually the operator’s fault; they’re a starved battery on an entrance set far from the meter, compounded by shade on the panel. We test the charge circuit before recommending anything. Call (833) 408-4022.
Because of the blackland clay. It expands and contracts sharply between wet springs and hot dry summers, and that movement heaves and rotates posts. A footing set in properly compacted base is the fix, which is why we re-set posts rather than just adjusting hinges. Call (833) 408-4022 for a free estimate.
Your automatic gate should have working entrapment protection, typically a safety photocell and, for many operators, a reversing edge or loop detector. If any of that is missing or non-functional, stop using the gate until it’s checked by a trained professional. Call (833) 408-4022 to have it inspected.
Yes. Cattle-panel and pipe-corral gates take livestock pressure, and the panels bend and the operator arms rack as a result. We straighten, reset, and realign those the same way we do driveway entrances. Call (833) 408-4022 for a free estimate.
Whether your gate is a battery-powered solar opener at the back of an acreage or a wide pipe entrance on a caliche lane, the problem is worth fixing right the first time. Call Gate Repair Georgetown at (833) 408-4022 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Georgetown.