Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Bartlett
If your gate is dragging, hanging, or refusing to close on a long gravel driveway, you need someone who understands what’s under the post, not just what’s on top of it. We repair gates across Bartlett – manual swing gates, heavy tube gates, and automated entrances – and our technicians have up to 13 years of experience with the wide farm gates and rural driveways that define this town. Bartlett properties have room for real working gates, and we know the difference between ornamental repair and utility work that keeps a lane functional.

Call (833) 408-4022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bartlett Homeowners Call Gate Repair Georgetown for Gate Repair
We specialize exclusively in gates. That matters in a town where a driveway gate is often a working piece of equipment – a livestock tube gate that has to swing true, a wide farm gate that has to open fully for a truck and trailer, a solar-powered operator that has to hold up on a gravel lane where running mains power is impractical.
Our technicians have up to 13 years of experience, and they’re brand-fluent across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether your operator is a Mighty Mule on a residential swing gate or a DoorKing on a commercial slide gate, we know the system and we know the parts.
Bartlett sits on Blackland Prairie clay, and that’s not a detail we treat as trivia. It’s the reason we start every diagnosis at the footing rather than the hinge. Gates that closed fine in the winter often drag by July, and that seasonal pattern shapes how we approach repairs here. We can work with your insurer and we carry strong local knowledge of how these gates fail.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Bartlett
Driveway Gate Repair in Bartlett usually starts on a gate that suddenly drags, won’t latch, or hangs by midsummer, and the cause is more often the ground than the gate itself. On Bartlett’s shrink-swell clay, a hinge post set without a deep concrete footing shifts after a wet spring, throwing the panel out of alignment. The right fix is to reset the post footing and re-hang the gate rather than just adjusting hinges on a post that’s still moving.
A typical driveway gate repair in Bartlett runs $180 to $420, and longer gravel lanes with a solar opener at the end can push toward the higher figure. We quote and agree the price before any work starts, so the written estimate sets the final cost.
Resetting Hinge Post Footings
The first thing we check on any Bartlett driveway gate is the footing. If the post has heaved or lost its concrete base, adjusting the hinges only buys a few weeks. Resetting it into a proper footing restores the panel alignment at the source.
Solar Opener Power Troubleshooting
On long driveways where running mains wiring is impractical, a solar gate opener carries the whole job. When it loses cycles or fails to close fully, we check battery health, panel angle, and how well the solar charge is holding through hot, humid weeks. A heavy-duty operator sized for the gate span and cycle count handles a wide farm gate better than a unit built for a residential entry.
Gate Welding in Bartlett
Gate Welding in Bartlett covers the metal work that rural gates always seem to need: bent tube gates from livestock pressure or a vehicle strike, cracked hinge brackets, worn latch plates, and frames that have pulled at the weld. On acreage properties, tube gates take load most residential ornamental gates never see, so welds fail at the stress points.
A typical gate welding repair in Bartlett runs $150 to $400 depending on how much metal needs replacing. Rust on the weld seams gets ground back before the new weld goes in, otherwise it returns.

Rust Cleanup Before the Weld
Welding over rusted metal leaves the repair weak. We grind the seam back to clean steel first, then weld and treat the joint so it holds.
Rack and Pinion Wear on Wide Slide Gates
On a wide slide gate or a heavy farm gate, the rack and pinion takes a beating. Worn or misaligned rack teeth cause a gate to jump, bind, or stall. Inspecting and correcting that alignment is part of getting a slide gate running smoothly again.
Trusted Brands We Service in Bartlett
We service the operators most Bartlett properties actually have. That includes solar-friendly systems like Ghost Controls and Mighty Mule on long driveways without mains power, plus heavier commercial-grade operators from DoorKing on high-traffic entrances and Elite on residential swing gates. We don’t stock parts on trucks or claim a local parts shelf, but we know these systems inside out, so the diagnosis is faster and the right part gets ordered the first time. Whether your gate is a residential DIY-grade operator or a commercial unit, we’ve worked on it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Bartlett Homes
- Hinge post heave on clay soils. Bartlett’s Blackland Prairie ground swells when wet and shrinks when dry, so posts set without a deep footing shift seasonally. A gate that closed perfectly in winter often drags or hangs by summer.
- Solar gate opener power loss. On long gravel lanes where mains wiring is impractical, the solar operator carries everything. Battery health, panel angle, and charge retention on hot, humid weeks all matter here.
- Rack and pinion wear on wide slide gates. Heavy farm gates and wide slide gates put real load on the rack and pinion, and worn or misaligned teeth cause binding and stalling.
- Bent or sagging tube gates. Livestock pressure or a vehicle strike bends a tube gate and stresses the welds. Bent frames need metal repair, not just hinge adjustment.
Pricing for Gate Repair in Bartlett, TX
Gate repair in Bartlett runs $150 to $450 for most jobs. A driveway gate repair (reset footing and re-hang) typically costs $180 to $420. Gate welding for bent or cracked metal usually lands between $150 and $400. A full electric gate repair with sensor or loop detector replacement falls in a similar range and is confirmed on-site. The written estimate is the price we agree before any work starts, and the estimate itself is free. What pushes a job higher is footings that need full resetting, long driveway access with multiple panels, or a solar operator that needs a heavy-duty replacement. We quote and agree the price before any work starts.
We Also Serve Cities Near Bartlett
We serve Bartlett and the towns around it, including Holland, Jarrell, Weir, and Little River-Academy. Our gate repair service reaches rural acreage properties across this stretch of Bell County and the neighboring communities on the same Blackland Prairie ground.
Serving Bartlett, TX – Our Local Coverage Area
We serve Bartlett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bartlett
Bartlett’s shrink-swell clay soil heaves gate posts seasonally, so a post that sat true in wet spring ground can shift once the soil dries. That throws the panel out of alignment, and the gate drags or hangs by summer. Resetting the post footing fixes the cause. Call (833) 408-4022 for an exact quote – estimates are free.
Yes, with the right operator diameter and cycle rating for the gate span. Solar operators sized for heavy farm gates handle long driveways where mains wiring is impractical, but undersized units stall or lose cycles. We check battery, panel angle, and rack alignment before recommending a replacement.
A hinge post set without a deep concrete footing, shifting on Bartlett’s clay ground. Adjusting the hinge on a post that’s still moving doesn’t hold. The fix is resetting the footing and re-hanging the gate.
Sometimes, but on Bartlett properties it’s just as often a solar power loss or a rack and pinion binding. Sensor, photocell, and loop detector failures are common too. A diagnosis on-site tells you which. Call (833) 408-4022 for an exact quote – estimates are free.
Yes. Tube gates, farm gates, and ornamental gates are all in scope, along with automated driveway gates. We specialize exclusively in gates, so a bent tube gate frame is a repair we handle, not a job we pass to a generalist. Call (833) 408-4022 for a free estimate.
For gate repair in Bartlett, call (833) 408-4022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Gate Repair Georgetown.