Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Weir, TX
Most gate work in Weir starts with a gate somebody built themselves, and that changes the whole job. Properties here sit on multi-acre tracts of ranch-style and manufactured homes, so a driveway gate is often welded steel pipe or cedar rather than a store-bought panel, and installation means building to a custom width instead of ordering a standard size. Central Texas heat and expansive clay soils move posts and frames year to year, so a gate that worked last summer may drag or misalign now. We handle the installation side of that work with technical precision. Call (833) 408-4022 to set up a free estimate in Weir.
Why Weir Homes Are Different
Weir is unincorporated, and that single fact shapes how gate work happens here. There is no municipal permitting layer to satisfy and no HOA dictating fence height, gate style or setback, so owners build what the property actually needs. On large rural lots those builds are one-offs: driveway gates welded from steel pipe, cedar plank gates hung between hand-set posts, chain-link closures around livestock pens. Because so many were installed by the owner and have been aging in place, a repair often means matching dimensions nobody wrote down and salvaging hardware that is no longer standard.
The ground and the weather add their own complications. Expansive clay soils swell and shrink with the drought-to-flood swings Central Texas goes through, and fence posts and gate frames ride that movement. After a summer of heat, sagging gates and latches that no longer catch are the common calls; after heavy spring rain, misalignment and rusted hinges show up next. Then there is the wind. Weir sits along the I-35 corridor between Georgetown and Jarrell, and dust and tumbleweed off the open pasture land drift against driveway gates and jam tracks. A gate that tests fine on a calm morning can bind the first time a north wind loads it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Weir Services
Two calls come in from Weir more than any other: a gate that has stopped working and needs diagnosis, and a gate that has reached the end of its service life and needs to come down. Each has its own page.
Gate Repair in Weir
Manual gate repair in Weir usually means getting a heavy gate back on its hinges and true again. Clay soil movement drops one post lower than the other, so the gate sags, the latch misses, and the frame racks every time it swings. We adjust hinges, reset or re-set posts to proper footing depth, true the frame and rebuild the latch strike so it catches cleanly. Rusted hardware gets replaced, and on welded pipe gates we work with the original fabrication rather than forcing standard parts onto it. We know how these gates were typically built here, which cuts the trial and error. For sagging, dragging or stuck gates, start with gate repair.
Electric Gate Repair in Weir
Automated gates on rural Weir tracts bring a second layer of failure: the operator. Mighty Mule and Ghost Controls units are common on residential driveways, while commercial-grade FAAC and DoorKing operators turn up on larger entries. Dust and windblown debris foul slide tracks and trip safety sensors; a board that took a lightning-adjacent surge stops responding altogether. We diagnose the operator and the gate as one system, because a binding gate will burn out a healthy motor and a healthy gate will still fail on a bad sensor. The dangerous parts here are the wiring and the power, plus heavy panels that can crush, so this is trained-professional work. For operators that won’t run, see electric gate repair.
Gate Installation in Weir
A new gate in Weir is rarely a standard-size purchase. With no HOA rules and no permitting layer, owners here build to their own driveway width, their own entrance grade and their own access needs, and the gate has to survive Central Texas heat and clay soil that keeps moving under the posts. We plan the installation around those realities so the gate swings true in year five, not just on day one. For the full scope of what we handle, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re driving out to open a gate by hand every time you leave a multi-acre property, or the existing gate has been worked on enough that the operator keeps failing.
What it costs in Weir
Automatic gate installation in Weir typically runs $3,500 to $7,500, covering the gate, the operator and the safety devices, with the written estimate setting the final figure.
How we do it
We measure the opening and entrance grade, set posts to proper footing depth, mount the gate and operator, run the power, install the safety edges and sensors, then test the full cycle under load.
Driveway Gate Installation
Signs you need it
The old driveway gate is beyond repair, the entrance has widened, or you want a gate that actually spans the width of your own drive rather than a stock panel that nearly fits.
What it costs in Weir
Driveway gate installation here typically runs $2,000 to $6,000 depending on width, material and whether an operator is included, per the written estimate.
How we do it
We survey the driveway line and swing clearance, dig and set the hinge and latch posts to proper footing depth, hang the gate, then adjust hinges and strike until the gate swings and latches without binding.
What Gate Installation Costs in Weir
These ranges cover typical Weir installations. The written estimate is what you actually pay, and it’s agreed before any work starts.
| Item | Typical range in Weir |
|---|---|
| Automatic gate installation | $3,500 – $7,500 |
| Driveway gate installation | $2,000 – $6,000 |
| Sliding gate installation | $2,500 – $6,500 |
Can you install a gate on a slope in Weir?
Yes. Sloped entrances are common on rural Weir tracts, and the posts, hinge placement and operator travel all have to account for the grade. We measure the slope before ordering anything and set posts to proper footing depth.
Do you handle the power run and the safety edges for a new gate?
Yes. Automatic gate installation includes the power run and the safety edges and sensors. We plan the electrical path when we measure so there are no surprises on install day. Call (833) 408-4022 for a free estimate.
Brands We Service in Weir
We’re independent and experienced with LiftMaster, Elite, FAAC and Mighty Mule, covering both residential-grade operators and commercial systems. We don’t claim stocked parts; we diagnose the failure, order the right part and book the repair. Turnaround depends on the part, and we tell you the timeline up front. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Weir, TX
Every price below is typical for Weir and estimated, never a quote. The written estimate sets the final figure and it’s agreed before any work starts.
| Service | Typical range in Weir |
|---|---|
| Automatic gate installation | $3,500 – $7,500 |
| Driveway gate installation | $2,000 – $6,000 |
| Sliding gate installation | $2,500 – $6,500 |
Price in Weir climbs with the width and weight of the gate, the material you choose, and whether the entrance needs post work because clay soil has already moved the old posts. We quote upfront and stick to the agreed number.
Neighborhoods We Serve in Weir
Weir is a small, unincorporated community along the I-35 corridor, and we cover the rural tracts and small subdivisions within it. Because properties are spread out, scheduling is by appointment and we confirm the address and entrance before the visit. One note for the area: I-35 sits close enough that dust and tumbleweed drift onto driveways here, so clearing the gate path before a technician arrives is worth doing.
- Weir town center
- Rural tracts east of I-35
- Pasture land along the corridor to Jarrell
- Ranch properties toward Georgetown
Service Area – Cities Near Weir
Weir sits between Georgetown and Jarrell, and we serve the surrounding communities as well. If you’re just outside Weir, it’s worth checking whether we cover your address before you call. We also work in Round Rock, TX, Georgetown, TX, Jarrell, TX and Bartlett, TX. Wherever you are in this part of Central Texas, the estimate is free and the price is agreed before work starts.
Serving Weir, TX – Our Local Coverage Area
We serve Weir and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Weir
Yes. We work all over Weir, and because the community is unincorporated there’s no HOA approval or city permit to clear before an installation. If you want to confirm any county requirement, check with the county before booking.
For repairs we offer same-day service where the schedule allows. Call (833) 408-4022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Installations are measured, ordered and scheduled rather than same-day.
Weir and the surrounding communities along the I-35 corridor, including Georgetown, Jarrell, Round Rock and Bartlett. If you’re on a rural tract just outside Weir, call and we’ll confirm coverage before booking.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Weir Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Jennifer Norris"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Lisa Anderson"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Veronica Rodriguez