Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Georgetown Homeowners
A gate that won’t open on its own, or one that was never set up right in the first place, can turn a simple morning into a stuck-in-the-driveway morning. We install new gates and gate operators across Georgetown, and we’ve seen where installations go wrong: posts set too shallow, operators undersized for the leaf, wiring run without a plan. Our technicians have up to 13 years of experience, and gates are the only thing we work on. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and the price is quoted and agreed before any work starts. Call (833) 408-4022 for a free estimate on a new gate or opener.
Automatic Gate Installation
Automatic Gate Installation is the full job of putting in a gate and an operator that opens it without you leaving the car, and it’s the right call when a manual gate has become a chore or when a property needs controlled access. It’s also the job for a gate whose operator has failed past the point of repair. We sell and fit systems on the brands we know best, including LiftMaster and Elite operators, and we match the operator to the leaf weight and the number of cycles it will run. Automatic gate installation in Georgetown typically runs about $2,400 to $6,500 for a residential job, depending on the gate, the operator and the travel, and the written estimate sets the final price. Because this work is measured, ordered and scheduled, we book it rather than promise same-day service.
Matching the Operator to the Gate
A lightweight ornamental swing gate and a solid redwood-leaf gate are not the same job for an operator. We weigh the leaf, check the hinge condition and look at the cycles the gate will run before we pick a unit. Getting this right the first time is the difference between an operator that lasts and one that burns out early.
Controls and Access
Automatic gates come with keypads, remotes, vehicle loop detectors and intercom entry if you want them. We plan the control layout before we mount anything so the wiring is clean and the entry works the way you drive. This is also where we talk through safety devices, since an automatic gate has to stop for people and vehicles.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the whole range of what we do: a new manual swing gate, a fresh automatic system, an operator swap, or fabricating a gate to fit an existing opening. You need this when a gate is missing, damaged beyond repair, or when a property changes hands and the old gate no longer fits how the new owner uses the drive. We handle manual and electric installations on the nine brands we know, including Mighty Mule and FAAC, and we fit the gate to the site rather than forcing the site to fit a stock gate. Gate installation services in Georgetown usually range from about $1,200 for a straightforward manual gate to $7,000 or more for a large automatic setup, and the written estimate sets the final price. We measure, order and schedule because this is not a same-day job.
Manual and Automatic in One Visit
Some jobs need a manual gate hung and squared, others need the full automatic package with controls and safety edges. We scope the job on site so you know exactly which one you’re getting. The price is quoted and agreed before any work starts, so there are no surprises when the crew arrives.
Working Around Driveway Grades
Georgetown drives slope in ways that matter for a gate, especially on a hill or a long rural run. We check grade and drainage at the site visit so the gate clears the ground through its full swing or slide. That check saves rework later.
Electric Gate Installation
Electric Gate Installation is the work of wiring an operator, its controls and its safety devices into a gate that opens under power, and it’s the job when a property needs entry control, not just a physical barrier. It’s the right answer for a gate that’s too heavy to move by hand or a property where people come and go at all hours. We’re fluent in the controls side, from vehicle loops to keypads, and we run the operator on the brand we’ve matched to the job, whether that’s a residential Mighty Mule or a heavier-duty FAAC unit. Electric gate installation in Georgetown typically lands between $2,000 and $6,000, with the operator, controls and power run all influencing the number, and the written estimate sets the final price. The price is quoted and agreed before any work starts.
Power and Safety Edges
An electric gate needs a proper power source and safety devices that stop the gate for a person or a vehicle. We plan the run and the safety edges as part of the install, not as an afterthought. Getting this wrong is both a safety problem and a liability problem, which is why we handle it carefully.
Control Options
Remotes, keypads, loop detectors and entry intercoms all get planned around how the property is actually used. We choose the controls before we mount anything so the wiring is tidy and the system works the first time. If you want something specific, tell us at the estimate and we’ll build it in.
Driveway Gate Installation
Driveway Gate Installation is the fit-out of a gate at a residential driveway, sized and placed so daily traffic flows cleanly and the gate sits square to the opening. It’s what you need when a drive is open to the road and you want controlled entry, or when the existing gate was never right for the width of the driveway. We measure the opening, check the grade and choose a gate style that suits the property, from a simple ornamental swing gate to a solid privacy gate. Driveway gate installation in Georgetown typically costs about $1,800 to $6,000, depending on width, material and whether an operator is included, and the written estimate sets the final price. This is scheduled work, measured and ordered, so we don’t promise same-day service on a new install.
Swing or Slide at the Drive
A swing gate opens inward or outward and needs clearance to clear the drive. A slide gate travels along a track and frees the driveway space. We look at the drive layout and slope with you before choosing, because the wrong one creates a daily hassle.
Clearance and Approach
The gate has to clear the ground through its full travel, and the vehicle has to clear the gate while it’s still moving. We check both, especially where the drive isn’t level. That’s the step that prevents the gate scraping or the arm hitting a car.
Sliding Gate Installation
Sliding Gate Installation puts in a gate that travels sideways along a track instead of swinging out, and it’s the right choice for a drive where there’s no room for a swing arc or where a wide opening needs a gate that moves fast. It’s common on commercial driveways and on tight residential lots where a swinging gate would block the entry. We fit cantilever and track sliders and pair them with the right operator, including heavier-duty FAAC and LiftMaster units, so the gate moves smoothly under load. Sliding gate installation in Georgetown typically runs about $2,500 to $7,000, driven by gate length, track and operator choice, and the written estimate sets the final price. We book it rather than promise same-day service because the track and footing have to be built right.
Track and Footing
A slide gate is only as good as its track and the footing underneath it. We set the footing to proper depth for the load the gate will carry and make sure the track runs true along its whole length. A track that’s off by a fraction causes the gate to drag and the operator to strain.
Cantilever vs Ground Track
A cantilever gate is supported on its own frame and doesn’t need a track across the driveway, so nothing to trip on or clog. A ground-track slider needs a clear, clean track and routine clearing of debris. Both have their place, and the drive and soil decide which one we choose with you.
Gate Opener Installation
Gate Opener Installation is the job of adding or replacing the motor that drives a gate, and it’s what you need when a manual gate wears you out, when an old operator has finally quit, or when the current opener was never sized for the gate it’s pushing. We work on the operators we know best, from residential Mighty Mule and Ghost Controls systems to commercial-grade DoorKing and BFT units, and we set each one for the weight and travel of the gate it drives. Gate opener installation in Georgetown generally runs about $800 to $2,800, depending on the operator, the gate and the controls, and the written estimate sets the final price. The price is quoted and agreed before any work starts, and installation is scheduled after a measure.
Sizing and Cycle Rating
An operator that’s too small for a heavy leaf works overtime and fails early. We look at leaf weight, hinge drag and the number of cycles the gate will run each day. From there, we pick an operator rated for that load rather than whatever happens to be on the shelf.
Replacing a Dead Operator
When an old operator can’t be saved, we match the new unit to the existing gate and controls so you don’t have to rewire the whole system. We also check the gate itself before we mount the new motor, since a bad hinge or a bent frame will wear out a new operator quickly. Getting the gate right first is the cheaper move.
Gate Fabrication
Gate Fabrication is building a gate to fit a specific opening when nothing off the shelf suits it: an odd width, an unusual grade, or a design that has to match the property. It’s the answer when a standard gate won’t hang square or when the opening is wider than stock sizes cover. We fabricate to the opening we measure, in the material and style that suits the property, and we fit the operator around the finished leaf so the gate moves correctly under load. Fabrication plus installation in Georgetown typically runs about $2,500 to $8,000 or more, depending on material, size and finish, and the written estimate sets the final price. This is measured, built and scheduled work, so we don’t promise same-day service.
Custom Sizes and Materials
We build to the opening rather than trimming a stock gate to fit, which keeps the frame square and the hinges aligned. Material choices, from steel to wood-look aluminum, change both the look and the weight. The weight matters, because it decides which operator the gate can carry.
Matching an Existing Fence or Building
A fabricated gate should look like it belongs with the fence and the building around it. We take the time to match style, spacing and finish so the gate reads as part of the property. That’s the difference between a gate that fits and one that merely closes.
Brands We Service
We specialize exclusively in gates, so the brands below are the ones we work on day to day. On LiftMaster systems, we know the control and safety setup and where the unit tends to wear under regular use, so diagnosis is quick and the fix is precise. On FAAC and BFT, we’ve handled both residential and heavier commercial operators, which means we understand how the load, travel and safety devices interact on larger gates. On Mighty Mule and Ghost Controls, we know the DIY-grade systems and how they behave when a homeowner has set one up and it’s never quite run right, so we can correct the install rather than start over speculatively.
We also work on Linear, Viking, DoorKing and Elite equipment, and each one has its own patterns of wear and setup quirks that we’ve come to know through the work. Whether you have a LiftMaster, a FAAC, a Mighty Mule, an Elite or any other make, we can help. That breadth matters, because a gate operator is not a generic box, and a specialist who knows the brand fixes it faster than a generalist who is guessing.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate won’t open or close under power. If the operator runs but the gate doesn’t move, or nothing happens when you press the remote, the fault could be in the operator, the controls or the gate itself. Don’t force it, because forcing a stuck gate can bend the frame or burn out the motor.
- The gate moves in jerks or stops partway. This usually points to a binding hinge, a track that’s out of line or an operator that’s undersized for the leaf. Left alone, it wears the operator faster and can leave the gate stuck open at the worst moment.
- Safety devices won’t stop the gate. If the gate keeps moving toward a person or vehicle when it should reverse, that’s a safety problem, not a convenience one. Stop using the gate and get it looked at before someone gets hurt.
- You hear grinding, clicking or a loud hum. Noises like these mean something mechanical is wearing inside the operator or the gate hardware. Addressing it early is cheaper than waiting for the unit to fail completely.
- The gate scrapes the ground or drags on the track. A gate that drags is a sign of a footing or alignment problem, and it puts constant strain on the operator. That strain shortens the life of the motor and the gate alike.
Our Process, Step by Step
- 1
Call and describe the job. We ask what the gate is doing, what kind it is and what you want from it. That first conversation tells us whether this is a repair, an operator swap or a full new install, and we book the right kind of visit. Call (833) 408-4022 and we’ll take it from there.
- 2
On-site measure and inspection. We measure the opening, check the grade, look at the hinges and existing hardware, and test the operator if there is one. On a repair we’ll also test the controls and safety devices so we know exactly what’s wrong rather than guessing.
- 3
Written estimate. You get a clear price for the job, with the gate, the operator, the controls and the installation all spelled out. The price is quoted and agreed before any work starts, so there’s no invoice surprise later.
- 4
Order and schedule. Once you approve, we order the gate and operator and schedule the install around the delivery. New gates and operators are measured and ordered, so we plan the date rather than promise same-day service.
- 5
Install and test. We set the posts or track to proper footing depth, hang or set the gate, mount the operator and wire the controls and safety devices. Then we run the gate through its full travel and test every safety stop before we leave, so you know it works before we’re gone.
How Much Does Gate Installation Cost in Georgetown?
Gate installation in Georgetown typically runs from about $1,200 for a basic manual gate up to $8,000 or more for a large automated or fabricated setup. A typical manual driveway gate installation runs $1,200-$2,500 depending on width and material. A typical automatic gate installation runs $2,400-$6,500 depending on the gate and the operator. A typical electric gate installation runs $2,000-$6,000, and a typical gate opener installation runs $800-$2,800. Sliding gate installation commonly runs $2,500-$7,000, and custom fabrication runs $2,500-$8,000 or more.
Several things move the number. Gate size and material matter most, since a wide steel gate weighs more and needs a heavier operator than a narrow ornamental leaf. The operator’s cycle rating and brand affect the price, with commercial-grade units costing more than residential ones. The controls and safety devices add to the total, and so does the power run if the gate isn’t near an existing source. On a slide gate, the track and footing add labor that a swing gate doesn’t need.
To avoid overpaying, get the estimate in writing before you approve anything, and make sure it covers the gate, the operator, the controls and the install as one number. Ask what happens if the grade or the footing turns out to be harder than expected, so a surprise on site doesn’t turn into a surprise on the invoice. Our free estimate includes an on-site measure, a check of the grade and hardware, and a written price with the scope spelled out. The price is quoted and agreed before any work starts. Call (833) 408-4022 for a free estimate.
Our Service Area Near Georgetown
We install and repair gates across Georgetown and the towns around it, from the neighborhoods in town out to the rural drives beyond. We regularly work in Jarrell, Bartlett and Bertram, and we reach Holland, Weir, Thrall, Thorndale, Little River-Academy and Round Rock as well. For a repair, we dispatch fast from 7am to 7pm, Sunday through Friday. For a new install, we book the measure and the install date around the order. Either way, you get a specialist on the job. If you’re in Georgetown itself, we can usually get out quickly.
Serving Georgetown, TX – Our Local Coverage Area
We serve Georgetown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Georgetown
Gate installation is the work of putting in a new gate, or a new gate and operator, at an opening on a property. It covers measuring the opening, setting posts or track, hanging or setting the gate, fitting the operator and controls, and testing the safety devices. It’s different from a repair, which fixes an existing gate rather than replacing it, and we handle both across Georgetown.
Most residential gate installations take a day or two on site once the gate and operator arrive, though a large fabricated or sliding gate can run longer. The lead time depends on the gate and the operator, since we measure and order before we schedule the install. We give you a realistic date at the estimate rather than promising same-day service.
Typical gate installation in Georgetown runs from about $1,200 for a basic manual gate to $8,000 or more for a large automatic or fabricated one. Automatic, electric and sliding installs usually land in the $2,000-$7,000 range, and an opener-only install runs about $800-$2,800. The written estimate sets the final price, and the price is quoted and agreed before any work starts. Call (833) 408-4022 for an exact quote; estimates are free.
Yes, we service and install LiftMaster gate operators. We’re fluent in the controls and safety setup on LiftMaster systems and know where those units wear under regular use. We also work on FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, so whichever operator you have, we can help.
We dispatch fast for repair calls across Georgetown, with same-day service often available. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. New installations are measured and scheduled, so those aren’t same-day jobs. If your gate is stuck, call and we’ll get you the right visit.
We stand behind our work, and any warranty terms are set out in the written estimate so you know what’s covered before you approve the job. Different gates and operators carry their own coverage, and we explain what applies to your install when we quote it. Ask at the estimate and we’ll spell it out clearly.
Clear the driveway and the area around the opening so the crew has room to work, and make sure any vehicles are moved before we arrive. Let us know where the power source is and whether anything needs to be shifted in advance. Beyond that, there’s not much to do, and we’ll walk you through anything specific at the measure.
Schedule Your Gate Installation Service in Georgetown Today
If you’re ready for a gate that opens the way it should, call (833) 408-4022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a free estimate, an on-site measure and a written price, with the price agreed before any work starts. Gates are all we do, and we know the brands.
Written by the team at Gate Repair Georgetown.